|
 |
Managed Switch |
|
PoE Switch |
|
Unmanaged Switch |
|
Media Converter |
|
Device Networking |
|
|
|
| |
| |
| |
| |
|
|
 |
 |
Managed switch |
 |
|
|
|
| |
    |
| |
|
 |
Highlights |
| ‧Flexible ring topology for faster fault recovery speed
(Recovery time blow 20 ms) |
| ‧Supports X-Ring, Dual Homing, Couple Ring and Dual Ring |
| ‧Optional LCSI management utility to simplify your network Management |
| ‧Redundant power inputs guarantee a non-stop operation |
| ‧Relay alarm for port breakdown, power fail |
| ‧2 redundant power inputs on power jack and terminal block |
| ‧Input Power Isolation design for Telecom application |
| |
|
|
| |
| X-Ring Application |
| |
| X-Ring Supports the fastest redundant recovery time which make a non-stop Ethernet connection.
If the primary communication path is disconnected the redundant ring technology provides a redundant path in the network. The following figure is a sample X- Ring application |
 |
|
| |
| Features |
| |
 |
Management |
| |
‧ |
SNMP v1 v2c, v3/ Web/Telnet/CLI/Menu Driven** |
| |
System Interface/Performance |
| |
‧ |
RJ-45 port Supports Auto MDI/MDI-X Function |
| |
‧ |
SFP(Mini-GBIC) Supports 100/1000 Dual Mode |
| |
‧ |
Store-and-Forward Switching Architecture |
| |
‧ |
Back-plane (Switching Fabric): 16Gbps |
|
VLAN |
| |
‧ |
Port Based VLAN |
| |
‧ |
Support 802.1 Q Tag VLAN |
| |
‧ |
GVRP |
| |
‧ |
Double Tag VLAN (Q in Q)* |
|
Security |
| |
‧ |
Port Security : MAC address entries/filter |
| |
‧ |
IP Security: IP address security management to
prevent unauthorized intruder. |
| |
‧ |
Login Security: IEEE802.1X/RADIUS |
|
QoS (Quality of Service) |
| |
‧ |
Supports IEEE 802.1p Class of Service, |
| |
‧ |
Per port provides 4 priority queues |
| |
‧ |
Port Base, Tag Base, IPv4 Type of service, IPv4/IPv6 Different Service Priority |
| |
|
|
|
|
|
| |
Specification |
| |
Technology |
Mechanical |
Standards |
IEEE 802.3 10Base-T Ethernet |
Casing |
IP 30 Protection Metal case |
IEEE 802.3u 100Base-TX |
Dimensions |
72mm (W) x 105mm (D) x 152mm (H) |
IEEE802.3ab 1000Base-T |
Installation |
DIN Rail and Wall Mount Design |
IEEE802.3z Gigabit fiber |
Environment |
IEEE802.3x Flow Control and Back Pressure |
Operating Temperature |
Standard version: -10℃~60℃ |
IEEE802.3ad Port trunk with LACP |
Storage Temperature |
-40℃ to 85℃ |
IEEE802.1d Spanning Tree |
Ambient Relative Humidity |
5% to 95% (Non-condensing) |
IEEE802.1w Rapid Spanning Tree |
Regulatory Approvals |
IEEE802.1p Class of Service |
Safety |
FCC Class A, UL, cUL, CE/EN60950-1 |
IEEE802.1Q VLAN Tag |
EMS |
CE EN61000-4-2 (ESD) |
IEEE 802.1x User Authentication-Radius |
CE EN61000-4-3 (RS) |
IEEE802.1ab LLDP** |
CE EN-61000-4-4 (EFT) |
Packet Buffer Memory |
1Mbits |
CE EN61000-4-5 (Surge) |
Processing Type |
Store-and-Forward |
CE EN61000-4-6 (CS) |
Address Table Size |
8K MAC addresses |
CE EN61000-4-8, |
Bandwidth Control |
Ingress Packet Filter and Egress Rate Limit |
CE EN61000-4-11, |
Broadcast/Multicast Packet Filter Control |
CE EN61000-4-12, |
Interface |
CE EN61000-6-2, |
LED Indicators |
Per unit :PWR, RM, Fault |
CE EN61000-6-4 |
Giga Copper :Link/Activity, Speed |
Environmental Test |
IEC60068-2-32 (Free fall), |
SFP: Link/Activity |
|
IEC60068-2-27 (Shock), |
RJ45 Ports |
6 Ports 10/100/1000T |
|
IEC60068-2-6 (Vibration) |
2 Ports 10/100/1000T (Combo Ports) |
Warranty |
5 years |
Fiber Ports |
2 Ports 100/1000 SFP sockets (Combo Ports) |
Console |
1x RJ45 connector |
Terminal Block |
Redundant power input design with alarm system |
Power |
Input Voltage |
DC 24~48V |
Power Consumption |
18 Watts(Open issue) |
Reverse Polarity Protection |
Present |
|
| |
Ordering information |
| |
IGS-M062C |
P/N: 8350-605 |
6 10/100/1000T + 2 10/100/1000T/ SFP Combo w/ X-Ring Managed Industrial Switch, -10C to 60C |
|
| |
|
| |
|
| |
|
